zebung

Your current location:HOME >> PRODUCTS >>  MARINE FLOATING OIL HOSETanker Rail Floating Hose

Tanker Rail Floating Hose

Updatatime:2020-04-02  Click:

Total 4 current first  Last | Next
Tanker Rail Floating Hose
Tanker Rail Floating Hose
1 / 4

Tanker Rail Floating Hose

ZEBUNG provide a range of high quality, high performance elastomer reinforced, smooth bore, oil suction and discharge hoses, extensively used at offshore moorings throughout the world. The ZEBUNG hoses fully comply with the requirements of the“Guide to Manufacturing and Purchasing Hoses for Offshore Moorings, Fifth Edition – 2009”.

ZEBUNG hose range includes Single Carcass and Double Carcass hoses construction for Submarine, Catenary and Floating applications, utilized in high integrity offloading installations worldwide.

All ZEBUNG hoses are designed and manufactured under a quality system in accordance with ISO 9001.

Standard:

The floating oil marine hoses are designed and produced in full accordance to OCIMF standard,the marine hoses are subjected to manufacturing and testing requirements dictated by ISO9000 quality standards.

Construction & Material

Main Carcass:

Main Lining / Inner Tube: Smooth, oil and fuel resistant Pure Seamless and Extruded Acrylontrile-Butadiene-Rubber (NBR);

Safety Lining: special construction to prevent defects or damage cause by incidental tearing or superficial damages of the main lining;

Reinforcements: Multiple Plies of High Tensile Textile cord. One embedded helical Body Steel wire.

Cover: Black Syntetic Rubber Smooth oil and fuel resistant.

Single Carcass And Double Carcass

Floating Material : Closed cell Foam.

Outer Cover:

Smooth black, Synthetic Rubber Resistant to Abrasion, Oil, Sea Water and Sunlight.

Helical Orange strip.

Fittings:

End connections built in during manufacture. ASME B 16.5 Class 150lb or 300lb Weld Neck Flat Face or Raised Face on request.

Tests:

All tests according to GMPHOM 2009 and Customer detail.

Application:

The floating marine oil hose is designed for transportation of crude oil and liquid petroleum products between loading and unloading vessels at offshore mooring systems.

Characteristic:

1. connecting aft manifold and tail hose

2. lifting lugs should be able to sustain loads, minimum breaking load is 12”=100KN 16”=150KN 20”=200KN

3. rated working pressure: 21 bar

4. minimum reserve buoyance: 20% or according to customer requirements

5. electrical continuity: electrical continuous or discontinuous

6. leak detection system: after the failure of the primary carcass, the detector will react to the leakage to remind the operator to remove the damaged hose to avoid economic loss and environmental pollution.

Specifications can be designed by customer requirements.

I.D. / mm

Weight in air / KG

O.D. / mm

M.B.R. / m

9.1m

10.7m

12.2m

A

B

C

150(6”)

524

576

628

500

290

440

0.6(2.0’)

200(8”)

726

817

908

560

350

530

0.8(2.7’)

250(10”)

931

1037

1143

690

420

630

1.0(3.3’)

300(12”)

1091

1225

1359

810

490

640

1.2(4.0’)

400(16”)

1650

1839

2028

1000

580

840

1.6(5.3’)

500(20”)

2200

2550

2800

1100

720

1000

2.0(6.7’)