zebung

Your current location:HOME >> PRODUCTS >>  MARINE FLOATING OIL HOSEHalf floating hose with one end reinforcement

Half floating hose with one end reinforcement

Updatatime:2020-04-02  Click:

Total 4 current first  Last | Next
Half floating hose with one end reinforcement
Half floating hose with one end reinforcement
1 / 4

Half floating hose with one end reinforcement

ZEBUNG provide a range of high quality, high performance elastomer reinforced, smooth bore, oil suction and discharge hoses, extensively used at offshore moorings throughout the world. The ZEBUNG hoses fully comply with the requirements of the“Guide to Manufacturing and Purchasing Hoses for Offshore Moorings, Fifth Edition – 2009”.

ZEBUNG hose range includes Single Carcass and Double Carcass hoses construction for Submarine, Catenary and Floating applications, utilized in high integrity offloading installations worldwide.

All ZEBUNG hoses are designed and manufactured under a quality system in accordance with ISO 9001.

Standard:

The floating oil marine hoses are designed and produced in full accordance to OCIMF standard,the marine hoses are subjected to manufacturing and testing requirements dictated by ISO9000 quality standards.

Construction & Material

Main Carcass:

Main Lining / Inner Tube: Smooth, oil and fuel resistant Pure Seamless and Extruded Acrylontrile-Butadiene-Rubber (NBR);

Safety Lining: special construction to prevent defects or damage cause by incidental tearing or superficial damages of the main lining;

Reinforcements: Multiple Plies of High Tensile Textile cord. One embedded helical Body Steel wire.

Cover: Black Syntetic Rubber Smooth oil and fuel resistant.

Single Carcass And Double Carcass

Floating Material : Closed cell Foam.

Outer Cover:

Smooth black, Synthetic Rubber Resistant to Abrasion, Oil, Sea Water and Sunlight.

Helical Orange strip.

Fittings:

End connections built in during manufacture. ASME B 16.5 Class 150lb or 300lb Weld Neck Flat Face or Raised Face on request.

Tests:

All tests according to GMPHOM 2009 and Customer detail.

Application:

The floating marine oil hose is designed for transportation of crude oil and liquid petroleum products between loading and unloading vessels at offshore mooring systems.

Characteristic:

1. connecting discharge facilities of FPSO

2. rated working pressure: 21 bar

3. minimum reserve buoyance: 20% or according to customer requirements

4. electrical continuity: electrical continuous or discontinuous

5. leak detection system: after the failure of the primary carcass, the detector will react to the leakage to remind the operator to remove the damaged hose to avoid economic loss and environmental pollution.

I.D. / mm

Weight in air / KG

O.D. / mm

M.B.R. / m

9.1m

10.7m

12.2m

A

B

C

D

150(6”)

428

478

528

340

220

340

410

0.9(3’)

200(8”)

556

623

690

400

270

400

480

1.2(4’)

250(10”)

840

941

1042

460

330

480

560

1.5(5’)

300(12”)

1021

1143

1265

520

390

570

650

1.8(6’)

400(16”)

1894

2164

2434

600

530

760

850

2.4(8’)

500(20”)

2450

2740

3030

760

630

880

960

3.0(10’)

600(24”)

3615

4000

4385

850

740

1050

1130

3.6(12’)