zebung

Your current location:HOME >> PRODUCTS >>  MARINE FLOATING OIL HOSEMainline Floating Hose

Mainline Floating Hose

Updatatime:2020-04-02  Click:

Total 4 current first  Last | Next
Mainline Floating Hose(for offshore moorings)
Mainline Floating Hose(for offshore moorings)
1 / 4

Mainline Floating Hose(for offshore moorings)

ZEBUNG provide a range of high quality, high performance elastomer reinforced, smooth bore, oil suction and discharge hoses, extensively used at offshore moorings throughout the world. The ZEBUNG hoses fully comply with the requirements of the“Guide to Manufacturing and Purchasing Hoses for Offshore Moorings, Fifth Edition – 2009”.

ZEBUNG hose range includes Single Carcass and Double Carcass hoses construction for Submarine, Catenary and Floating applications, utilized in high integrity offloading installations worldwide.

All ZEBUNG hoses are designed and manufactured under a quality system in accordance with ISO 9001.

Single Carcass

A single carcass hose is capable to withstand the demands of the world’s most exposed offshore installations. This hose consists of the tube, spiral reinforcement and cover layers.

Double Carcass

A double carcass hose is an anti-pollution hose. When the primary carcass leaks, the secondary carcass remains intact and takes over.

Standard:

The floating oil marine hoses are designed and produced in full accordance to OCIMF standard,the marine hoses are subjected to manufacturing and testing requirements dictated by ISO9000 quality standards.

Construction & Material

Main Carcass:

Main Lining / Inner Tube: Smooth, oil and fuel resistant Pure Seamless and ExtrudedAcrylontrile-Butadiene-Rubber (NBR);

Safety Lining: special construction to prevent defects or damage cause by incidental tearing or superficial damages of the main linig;

Reinforcements: Multiple Plies of High Tensile Textile cord. One embedded helical Body Steel wire.

Cover: Black Syntetic Rubber Smooth oil and fuel resistant.

Single Carcass And Double Carcass

Floating Material : Closed cell Foam.

Outer Cover:

Smooth black, Synthetic Rubber Resistant to Abrasion, Oil, Sea Water and Sunlight.

Helical Orange strip.

Fittings:

End connections built in during manufacture. ASME B 16.5 Class 150lb or 300lb Weld Neck Flat Face or Raised Face on request.

Tests:

All tests according to GMPHOM 2009 and Customer detail.

Application:

The floating marine oil hose is designed for transportation of crude oil and liquid petroleum products between loading and unloading vessels at offshore mooring systems.

Characteristic:

1.Indepent foam floating casing to prevent water absorption

2.CR outlayer with excellent resistance to abrasion ,UV,aging and corrosive environment.

3.Easy installation and less maintenance

4.Cutomized steel flanges are available

5.rated working pressure: 21 bar

6.minimum reserve buoyance: 20% or according to customer requirements

7.electrical continuity: electrical continuous or discontinuous

8.leak detection system: after the failure of the primary carcass, the detector will react to the leakage to remind the operator to remove the damaged hose to avoid economic loss and environmental pollution.

I.D. / mm

Weight in air / KG

O.D. / mm

M.B.R / m

9.1m

10.7m

12.2m

A

B

150(6”)

425

475

525

400

320

0.9(3’)

200(8”)

558

623

688

420

370

1.2(4’)

250(10”)

809

910

1011

490

430

1.5(5’)

300(12”)

985

1103

1221

590

520

1.8(6’)

400(16”)

1446

1676

1906

740

670

2.4(8’)

500(20”)

2000

2262

2524

850

770

3.0(10’)

600(241”)

2669

3042

3415

1010

910

3.6(12’)